Which element Influent the Mixing time

input time：2018-08-17 09:59:32    hits：

Operating parameter	Influence on mixing time
Mixing volume	A higher mixing volume will lead to higher mixing time But doubling the volume, does not mean doubling the mixing time For mixers at Fr>1, after a certain volume, mixing time will be almost constant Note : a mixer should not be over-filled otherwise the mixing may even become impossible
Mixing speed	A higher mixing speed usually gives a shorter mixing time Influence on the powder should however be considered (powder breakage）
Froude number 弗劳德数	Higher Fr number should give shorter mixing time Powder breakage will be a concern when Fr >>1 高的弗劳德数会降低混合时间，但是当弗劳德数远远大于1的时候，粉体被破坏的可能性大大增强
Solids type 固体粉体类型	The more the particle sizes of the mix consituents are different, the more difficult it will be to mix 粉体的颗粒大小差异性越大，越难混合

 Mixing time is also dependent on the sequence and place of filling the ingredients. In particular, the position of addition of micro ingredients is of prime importance. In case the micro ingredients are added on the side of a mixer, the mixing time can be greatly impacted. As a good practice, processes must be designed to have the small, minor and micro ingredients introduced in the middle of the mixer, in any case in the "active" area of the blender.

LAST：Froude Number Application in mixing principle

NEXT：Is the powder mix homogenous ?